| Параметр | Значэнне |
|---|---|
| Пункт | Specifications |
| Вага | 450 g approx. |
| Падрабязнасці | Controllers(Ethernet communications port) |
| Прадукт | Ultra High-speed- High-precision Laser Displacement Sensor |
| Матэрыял | Case: Polycarbonate |
| Аксесуар | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc.Ferrite cores (E04SR200935A, by Seiwa Electric Mfg. Co., Ltd.): 3 pcs |
| Нумар дэталі | HL-C21C |
| Скінуць увод | NPN open-collector transistor- Reset is done when connected to Common (-).- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Выхад сігналізацыі | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less [between each output and Common(-)]- Residual voltage: 1 V or less (at 100 mA sink current) |
| Назва прадукту | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| Уваходныя дадзеныя сінхранізацыі | NPN open-collector transistor- ON at / during connection to Common (-)(depending on analysis mode)- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Частата дыскрэтызацыі | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| Выхад стробоскопа | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less [between each output and Common(-)]- Residual voltage: 1 V or less (at 100 mA sink current) |
| USB-інтэрфейс | USB 2.0 Full-speed (USB 1.1 compatible) compliant |
| Нумар прадукту | HL-C21C |
| Напружанне харчавання | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Уваходная адзнака для нуля | NPN open-collector transistor- Zero set is ON when connected with Common (-).- Zero set turns to OFF after continuously connected to Common (-) for one second.- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Індыкатар: Харчаванне | Green LED (lights up at power on) |
| Спажыванне току | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| Індыкатар: Сігналізацыя 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| Індыкатар: Сігналізацыя 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| Уваход кіравання лазерам | NPN open-collector transistor- Laser emission is stopped when connected to Common (-).- Laser is emitted immediately after opened.- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Увод змяненняў памяці | NPN open-collector transistor- Memory is specified when connected to Common (-).- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Падключальная галоўка датчыка | Number of connectable units: Max. 2 units. |
| Уваход дыстанцыйнай блакіроўкі | NPN open-collector transistor- Laser emission is delayed when connected to Common (-).- Laser emission stops at open- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Налада / адлюстраванне дадзеных | Compact console (optional) |
| Аналагавы выхад: ток | Current output scale: 4 to 20 mA / F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max.Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| Аналагавы выхад: напружанне | Voltage output scale: -5 to +5 V / F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mVLinearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 OhmResponse delay time: 1.5 micro s / V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| Вывад меркаванняў (HI, GO, LO) | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less [between each output and Common(-)]- Residual voltage: 1 V or less (at 100 mA sink current) |
| Выхад сігналізацыі: праца выхаду | Opened when the amount of light is insufficient |
| Выхад стробоскопа: праца выхаду | Opened at data determination |
| Выхад сігналізацыі: абарона ад кароткага замыкання | Incorporated |
| Выхад стробоскопа: абарона ад кароткага замыкання | Incorporated |
| Індыкатар: Галоўка датчыка A Лазернае выпраменьванне | Green LED (lights up during or immediately before laser emission of sensor head A) |
| Індыкатар: галоўка датчыка B Лазернае выпраменьванне | Green LED (lights up during or immediately before laser emission of sensor head B) |
| Устойлівасць да ўздзеяння навакольнага асяроддзя: вільготнасць навакольнага асяроддзя | 35 to 85 %RH |
| Устойлівасць да ўздзеяння навакольнага асяроддзя: ударатрываласць | 196 m / s2 acceleration (20G approx.) in X, Y, and Z directions for three times each |
| Устойлівасць да ўздзеяння навакольнага асяроддзя: тэмпература навакольнага асяроддзя | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Выхад рашэння (HI, GO, LO): Выхадная аперацыя | Opened at output operation |
| Устойлівасць да ўздзеяння навакольнага асяроддзя: вібрацыйная ўстойлівасць | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| Выхадны сігнал (HI, GO, LO): абарона ад кароткага замыкання | Incorporated |
Тэхнічныя характарыстыкі і дадзеныя аб прадукцыйнасці
Кіраўніцтва па ўсталёўцы і эксплуатацыі