| Параметр | Значэнне |
|---|---|
| Пункт | Specifications |
| Кабель | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Выхад | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Вага | Net weight: 85 g approx. |
| Падрабязнасці | DC-voltage |
| Прадукт | Adjustable Range Reflective Photoelectric Sensor |
| Матэрыял | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Аксесуар | Adjusting screwdriver: 1 pc. |
| Гістэрэзіс | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Абарона | IP67 (IEC) |
| Нумар дэталі | EQ-511 |
| Даўжыня кабеля | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Назва прадукту | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Рэжым датчыка | Switchable either BGS or FGS function |
| Час водгуку | 2 ms or less |
| Нумар прадукту | EQ-511 |
| Напружанне харчавання | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Функцыя таймера | - |
| Рэгуляваны дыяпазон | 0.2 to 2.5 m0.656 to 8.202 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Вільготнасць навакольнага асяроддзя | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Выпраменьваючы элемент | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Ударатрываласць | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Спосаб падключэння | Screw-on terminal connection |
| Рэгулятар адлегласці | 2-turn mechanical adjuster with indicator |
| Прыёмны элемент | 2-segment photodiode |
| Навакольнае асвятленне | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Тэмпература навакольнага асяроддзя | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Індыкатар працы | Orange LED (lights up when the output is ON) |
| Індыкатар стабільнасці | Green LED (lights up under stable operating condition) |
| Вібраўстойлівасць | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Супраціўленне ізаляцыі | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Выхад: Аперацыя вываду | Switchable either Detection-ON or Detection-OFF |
| Вытрымка напружання | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Спажыванне магутнасці / току | 45 mA or less |
| Адпаведнасць дырэктыве па маркіроўцы CE | EMC Directive, RoHS Directive |
| Выхад: абарона ад кароткага замыкання | Incorporated |
| Функцыя аўтаматычнага прадухілення перашкод | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Далёкасць спрацоўвання (пры максімальнай адлегласці ўстаноўкі) | 0.1 to 2.5 m0.328 to 8.202 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Тэхнічныя характарыстыкі і дадзеныя аб прадукцыйнасці
Кіраўніцтва па ўсталёўцы і эксплуатацыі