| Параметр | Значэнне |
|---|---|
| Ue | |
| Вашынгтон | Resistive load (DC-12) |
| Г.зн. | AC |
| B10D | 2,000,000(ISO 13849-1 Annex C Table C.1) |
| Пункт | Specifications |
| Кабель | UL style 2464, No.22 AWG 12-core |
| Вага | Approx. 680 g |
| Прадукт | Safety door switch with key |
| Матэрыял | Enclosure : PA66 |
| Абарона | IP 65 (IEC 60529) |
| Нумар дэталі | SG-B2-K2CC-5 |
| Даўжыня кабеля | 5m16.404 ft |
| Назва прадукту | Safety door switch with key SG-B2 |
| Нумар прадукту | SG-B2-K2CC-5 |
| Сіла блакавання | 1,400 N min. (GS-ET-19)(Note)(500 N min. : SG-K24 actuator)(Note): The actuator locking strength is rated at 1,400 N of static load. Do not apply a load higher than the rated value. When a higher load is expected to work on the actuator, provide an additional system consisting of another safety switch without lock (such as the SG-A1 safety switch) or a sensor to detect door opening and stop the machine. |
| Ударатрываласць | Malfunction : 100 m/s2, Destruction : 1,000 m/s2 |
| Кантактнае супраціўленне | 700 mΩ max. (initial value, 5 m16.404 ftcable) |
| Кантактная схема | |
| Рабочая частата | 900 operations/hour |
| Дзеючыя стандарты | EN 1088, IEC 60947-5-1, EN 60947-5-1,GS-ET-19, UL 508, CSA C22.2 No.14 |
| Сіла прамога адкрыцця | 80 N min. |
| Пазіцыя вымання ключа | C(removable in LOCK position) |
| Вібраўстойлівасць | Malfunction : 10 to 55 Hz, half amplitude 0.35 mm0.014 inDestruction : 30 Hz, half amplitude 1.5 mm0.059 in |
| Дзеючыя дырэктывы | Machinery directive (2006/42/EC)Low voltage directive (2006/95/EC) |
| Прамы адчыняльны ход | 11 mm0.433 inmin. (actuator : SG-K21)12 mm0.472 inmin. (for other actuators) |
| Электрычная трываласць | 100,000 operations min. (AC-12, 250 V 1 A)1,000,000 operations min. (AC/DC 24 V 100 mA)(900 operations/hour) |
| Механічная трываласць | 1,000,000 operations min. (GS-ET-19)Rear unlocking button : 3,000 operations min. (Type SG-B2-□-L5) |
| Цеплавы ток (Ith) | ・2.5 A・Ambient temperature :-25 to +60 ℃-13 to +140 ℉: 2.5 A max.+60 to +65 ℃+140 to +149 ℉: 1.5 A max.+65 to +70 ℃+149 to +158 ℉: 1.0 A max. |
| Індуктыўная нагрузка (AC-15) | - |
| Індуктыўная нагрузка (DC-13) | 2.3A |
| Хуткасць працы прывада | 0.05 to 1.0 m/sec. |
| Ключ: Сіла непасрэднага адчынення | 0.6 N・m min. |
| Ключ: Ключавая трываласць на разрыў | 1.0 N・m min. |
| Ключ: ступень прамога адкрыцця | 60°min. |
| Ключ: Механічная трываласць | 100,000 operations min. |
| Намінальнае напружанне ізаляцыі (Ui) | 250 V(Note): Ratings approved by UL, c-UL : 125 V |
| Ключ: Ключавая эксплуатацыйная даўгавечнасць | 10,000 operations min. |
| Ключ: Эксплуатацыйныя характарыстыкі | 2 positions |
| Умовы працы: вышыня над узроўнем мора | 2,000 m6,561.68 ftmax. |
| Клас абароны ад паражэння электрычным токам | Class II (IEC 61140)(Note), 回(double-insulated)(Note): Basic insulation of 2.5 kV impulse withstand voltage is ensured between different contact circuits.When both SELV (safety extra low voltage) or PELV (protective extra low voltage) circuits and other circuits (such as 230 V AC circuits) are used for the solenoid power and contact circuits at the same time, the SELV or PELV requirements are not met any more. |
| Прылада абароны ад кароткага замыкання | Use 250 V / 10 A fast acting type fuse |
| Імпульснае вытрымлівальнае напружанне (Uimp) | 2.5 kV |
| Умоўны ток кароткага замыкання | 50 A (250 V) |
| Умовы працы: вільготнасць навакольнага асяроддзя | 45 to 85 % RH |
| Умовы эксплуатацыі: ступень забруджвання | 3 (Inside 2) |
| Дзеючыя стандарты: Стандарты выкарыстання | IEC 60204-1, EN 60204-1 |
| Умовы працы: Тэмпература навакольнага асяроддзя | -25 to +70 ℃-13 to +158 ℉(No dew condensation or icing allowed)Storage : -40 to +80 ℃-40 to +176 ℉ |
| Намінальнае працоўнае напружанне (Ue) / Намінальны працоўны ток (Ie) | Ue30V125V250VIeACResistive load (AC-12)-2.5A1.5AInductive load (AC-15)-1.5A0.75ADCResistive load (DC-12)2.5A1.1A0.55AInductive load (DC-13)2.3A0.55A0.27A |
Тэхнічныя характарыстыкі і дадзеныя аб прадукцыйнасці
Кіраўніцтва па ўсталёўцы і эксплуатацыі