У наяўнасці Гарачы прадукт
LS-H901-Y
LS-H901-Y PANASONIC Sensor head, retro reflective, range 1m, cable 2m, without reflector
$0.00
Долары ЗША
у наяўнасці
Асноўныя характарыстыкі
Пункт:
Specifications
Кабель:
0.15 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Вага:
Net weight: 50 g approx.Gross weight: 85 g approx.
Падрабязнасці:
Sensor heads(Coaxial retroreflective type)
Інфармацыя пра пастаўшчыка
PANASONIC
Прадукты: 4316
Звычайна адпраўляецца на працягу 2-3 рабочых дзён
Гарантаваная якасць
Хуткая дастаўка
Тэхнічная падтрымка
Тэхнічныя характарыстыкі
| Параметр | Значэнне |
|---|---|
| Пункт | Specifications |
| Кабель | 0.15 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Вага | Net weight: 50 g approx.Gross weight: 85 g approx. |
| Падрабязнасці | Sensor heads(Coaxial retroreflective type) |
| Прадукт | Amplifier-separated Type Digital Laser Sensor |
| Матэрыял | Enclosure: PBTIndicator cover: PolycarbonateBeam-emitting / receiving surfaces: Glass |
| Аксесуар | MS-LS-1(Mounting bracket): 1pc.RF-330(Refrector): 1pc. |
| Памер плямы | Approx. dia. 6 mm dia. 0.236 in or less (at a distance from the sensor head of 1 m 3.281 ft) |
| Абарона | IP40 (IEC) |
| Нумар дэталі | LS-H901-Y |
| Назва прадукту | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Нумар прадукту | LS-H901-Y |
| Аб'ект датчыка | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| Вільготнасць навакольнага асяроддзя | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ударатрываласць | 100 m / s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Дыяпазон адчувальнасці: HYPR | 0.01 to 2.5m0.033 to 8.202 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Дыяпазон спрацоўвання: U-LG | 0.01 to 2m0.033 to 6.562 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Навакольнае асвятленне | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Тэмпература навакольнага асяроддзя | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| Індыкатар працы | Orange LED (lights up when the amplifier output is ON) |
| Вібраўстойлівасць | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Прыдатныя ўзмацняльнікі | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| Выпраменьваючы элемент: Тып | Red semiconductor laser diode |
| Супраціўленне ізаляцыі | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Дыяпазон спрацоўвання: рэжым STD | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Дыяпазон спрацоўвання: рэжым FAST | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Дыяпазон спрацоўвання: рэжым H-SP | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Дыяпазон спрацоўвання: рэжым U-LG | 0.01 to 1.5m0.033 to 4.921 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Вытрымка напружання | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Выпраменьваючы элемент: клас лазера | Class 1 [IEC / JIS / FDA](Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and )Radiological Health) under the FDA (Food and Drug Administration). |
| Выпраменьвальны элемент: максімальны выхад | 1mW |
| Адпаведнасць дырэктыве па маркіроўцы CE | EMC Directive, RoHS Directive |
| Выпраменьваючы элемент: Пікавая даўжыня хвалі выпраменьвання | 660 nm 0.026 mil |
Апісанне прадукту
More details
Асноўныя характарыстыкі
- Прамысловая якасць
- Адпавядае патрабаванням RoHS
- Сертыфікаваны CE
- 1-гадовая гарантыя
Дакументы па прадукце
Тэхнічны ліст
Тэхнічныя характарыстыкі і дадзеныя аб прадукцыйнасці
Кіраўніцтва карыстальніка
Кіраўніцтва па ўсталёўцы і эксплуатацыі
