| Параметр | Значэнне |
|---|---|
| Пункт | Specifications |
| Прадукт | FP7 High-speed Counter Units |
| Нумар дэталі | AFP7HSC2T |
| Назва прадукту | FP7 High-speed Counter |
| Нумар прадукту | AFP7HSC2T |
| Уваход: Метад ізаляцыі | Photocoupler insulation |
| Уваход: Намінальнае ўваходнае напружанне | 12 to 24 V DC / 3.5 to 5 V DC |
| Функцыя падліку: Тып лічыльніка | Linear counter / Ring counter |
| Функцыя падліку: знешні ўвод/вывад | Control signal input: 4 points (2 points/ch), External output: 4 points (2 points/ch) |
| Функцыя падліку: уваходны сігнал | Phases A, B and Z |
| Уваход: Уваходны імпеданс: 5 В пастаяннага току | 390 Ohm (5 V DC) approx. |
| Функцыя падліку: дыяпазон падліку | Signed 32-bit (-2,147,483,648 to +2,147,483,647) |
| Уваход: Уваходны імпеданс: 24 В пастаяннага току | 3.0 kOhm approx. |
| Функцыя падліку: колькасць лічыльнікаў | 2ch |
| Уваход: Дыяпазон напружання выкарыстання: 5 В пастаяннага току | 3.5 to 5.25 V DC |
| Іншыя функцыі: функцыя захопу | Acquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured. |
| Функцыя падліку: тып уваходу лічыльніка | Individual input (Phases A and B): 1 multiple, 2-multipleDirection discrimination input: 1 multiple, 2-multiple2-phase input: 1 multiple, 2-multiple, 4-multiple |
| Уваход: Устаноўка пастаяннай часу ўваходу | None, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s |
| Уваход: Дыяпазон напружання выкарыстання: 24 В пастаяннага току | 10.8 to 26.4 V DC |
| Функцыя падліку: Максімальная ўваходная частата | 4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %) |
| Іншыя функцыі: функцыя перапынення ўводу | Available (2 points/ch, Max. 8 points/unit)(Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs.(Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number. |
| Уваход: мін. напружанне ўключэння / мін. ток уключэння: 5 В пастаяннага току | 3.0 V DC / 4 mA |
| Функцыя параўнання: функцыя супастаўлення мэтавага значэння | Depending on the count direction, sets or resets the output when the counter value reaches the target value. |
| Уваход: мін. напружанне ўключэння / мін. ток уключэння: 24 В пастаяннага току | 10 V DC / 4 mA |
| Уваход: Максімальнае напружанне выключэння / Максімальны ток выключэння: 5 В пастаяннага току | 1.0 V DC / 0.5 mA |
| Знешні выхад: функцыя вываду вынікаў параўнання | Outputs the result of comparison function. |
| Уваход: Максімальнае напружанне выключэння / Максімальны ток выключэння: 24 В пастаяннага току | 2.0 V DC / 2 mA |
| Функцыя вымярэння: функцыя вымярэння частаты | Measures the intervals between the variations of count values, and calculates the frequency. |
Тэхнічныя характарыстыкі і дадзеныя аб прадукцыйнасці
Кіраўніцтва па ўсталёўцы і эксплуатацыі